News

Version 1.2.5.0 - NON EXPERIMENTAL:

• Bug Fix: Fix wrong calculation of deceleration point in geo descent
• Bug Fix: Several sync issues solved for CFD
• Bug Fix: Fix for doors issues in Turn Around State
• Bug Fix: Fix for incorrect fuel burn from Center tank
• Bug Fix: Retard call prevented on take-off in CFD mode
• Bug Fix: IRS not aligning is some cases fixed        
• Improvement: Tweaks to PFD display
• Improvement: 2D MCDU resized to avoid overlapping windows
• Improvement: Tweaks to Procedure Turns
• Improvement: vPilot second radio Rx on/off control from aircraft radio panel added
• Improvement: FADEC logic overauled to prepare for A330

Hello everyone,

Please note that a new update for Aerosoft's Airbus professional Series for P3D V4 is available, including:

• Aerosoft Airbus A318/A319 professional
• Aerosoft Airbus A320/A321 professional
• A320 Family professional Bundle

Version 1.2.5.0 - Non experimental

                Bug Fix: Fix wrong calculation of deceleration point in geo descent

                Bug Fix: Several sync issues solved for CFD

                Bug Fix: Fix for doors issues in Turn Around State

                Bug Fix: Fix for incorrect fuel burn from Center tank

                Bug Fix: Retard call prevented on take-off in CFD mode

                Bug Fix: IRS not aligning is some cases fixed

                Improvement: Tweaks to PFD display

                Improvement: 2D MCDU resized to avoid overlapping windows

                Improvement: Tweaks to Procedure Turns

                Improvement: vPilot second radio Rx on/off control from aircraft radio panel added

                Improvement: FADEC logic overauled to prepare for A330

Update Content:

From our lead systems engineer:

"To use the new force trim option use the AMS and click on the new "Controls" section for the 530, and assign a key or button to the force trim trigger.

When you are in the cockpit, you must enable the force trim by using the two previously unused switches labelled OVSPD TEST and FAULT TEST. (picture below.) The one on the left turns on the force trim system when in the Up position. The one on the right enables the force trim to work with the rudder too when UP.

With a key assigned in AMS and both switches up, a press on the force trim button will make the current cyclic and rudder petal settings the new center point. Thus as soon as you press force trim, return the joystick (and rudder if you have that switch up) to the neutral position. The helicopter should retain its current trim. You can use force trim as often as you'd like.

In case you are unfamiliar with it: Force Trim is not an autopilot! Be sure the helicopter is in a stable condition when you push the button. If it's rotating or banking, you'll simply lock in that trend and have to fight it. (This is how it really works, it takes some getting used to.)

This can take a great deal of the work out of flying. The real MD530 did not have a force trim, we're adding it as a optional "quality of life" enhancement.

~ Dutch"

Aerosoft CRJ 700/900 X update to version 1.2.0.

Please login to your Real Flight Shop account to download the latest version.

Change log as below:

• True Glass & Real Light are implemented for those running the latest Prepar3d